Get quick and convenient access to just the hints you need for Culpa Innata, without staying on our website. Just download a free trial
version of our UHS Reader software and
a copy of these hints. You will get the
same gradual hints you see here -- unlike ordinary cheats or a
walkthrough that can spoil your game.
You can also buy the full version of the UHS Reader
for Windows or macOS. For just $14.95, you get full access to hints for
hundreds of games and 1 year of free updates. You can also search, decode, or print an entire
game's worth of hints at once.
Ask the Author
If you have questions about a puzzle that aren't answered
anywhere in these hints,
you may contact the author.
Culpa Innata Hints
How do I get power to the control panel in the fenced area of the Grand Shaft?
1 of 15: First off, you'll need to find the circuit board to insert into the control panel behind this fenced-off area in order to solve the puzzle.
2 of 15: Once you have the circuit board, use it with the control panel to solve the puzzle.
3 of 15: You will see five connections on the left of the board, and three on the right.
4 of 15: The goal here is to connect the colors properly from the left to right.
5 of 15: So, the two red wires on the left will need to connect to the red light on the right side, and the same goes for the two greens, and the single blue.
6 of 15: You only need to make one path from each of the five left-hand tracks to the three right-hand ones, so don't worry about there being extra tracks lying around, they are only here to throw you off the scent.
7 of 15: I can't really explain this one very easily -- it's just a matter of following the lines.
8 of 15: You need to use a total of ten jumpers (grab them with the tweezers from your makeup kit), in order to complete the circuit.
9 of 15: Seven of them are horizontal, and three are vertical.
10 of 15: Place the horizontal ones on the two bottom-left-most pairs of pins, then the two sets that are directly to the right of the higher of those first two.
11 of 15: Next, place two more horizontal ones above the two you just placed (not above the first pair, above the other two). This will make three pairs.
12 of 15: See the top-right jumper you have used so far? Move one pair of pins to the right, and one up, and insert one there.
13 of 15: Now, for the three vertical pins. They all go on the top two rows. Number those pairs of vertical pins from 1 from the left to 18 on the right.
14 of 15: Place the vertical jumpers at pairs 5, 10, and 17.
15 of 15: Now push the green button at the far right of the circuit board.
