RHEM Hints

What are the telescope things used for?

  • 1 of 10: Scoping out the place.
  • 2 of 10: While looking through a scope, use the little grabby hand cursor near the view to rotate it left and right.
  • 3 of 10: Notice what items the numbered vertical lines cross.
  • 4 of 10: There are ten lines, numbered 0 to 9.
  • 5 of 10: All four of the pumps in the area are crossed by a vertical line.
  • 6 of 10: Note that the pump itself, not its button or readout gauge, is crossed by the line.
  • 7 of 10: Write down the number of the vertical line that passes through each pump. This info, along with each pump's readout, is useful in solving an important water-related puzzle elsewhere.
  • 8 of 10: NOTE: You'll get different numbers from the two different telescopes. Be sure to visit both and write down both number sets.
  • 9 of 10: Also, note down the swirly symbol that's at the base of each telescope. It's different for each one.
  • 10 of 10: I'd advise you to draw a little map of the reservoir area or print out my Reservoir Map and use it. That way you can note the location of each pump on the map and write its three bits of data next to it, not forgetting to note where each number came from.